DIGIT-ARC read-only archive · snapshot: July 23, 2026

DIGIT-ARC / Software / Software Q&A

Software unpaking problem

11 posts · originally from https://geek.digit.in/community/threads/software-unpaking-problem.12539/

S
satya_gen Original post #1
Jul 11, 2005 at 12:42 PM
I have bought a new mechine.
conf:
----------------------------------------------------
AMD-64 3000+ (939 socket)
MSI RS480M2-IL motherboard.
512 MB - Single DDR Transend RAM 400 FSB
80GB - Seagate SATA Hard disk
OS - XP professional sp1
-------------------------------------------------------

What my problem is, I'm not able to install winamp 5.08, windows media player 10 and all softwares shows same like this problem.

The error is
1. Unpaking problem, check its integrity and try again.
2. Error 1335;

What i have to do?

please tell any suggestion.
Choto Cheeta
Choto Cheeta #2
Jul 11, 2005 at 2:02 PM
humm 1st off all get that SP2 installe..... or u can try this...

cleasr the temp folder.... cheak the CD ur r ilstalling from is OK.... Change the memory settings for installation

  1. Click Start, and then click Run.
  2. In the Open box, type msconfig, and then click OK
  3. On the BOOT.INI tab, click Advanced[/b] Options.
  4. In the BOOT.INI Advanced Options dialog box, select the /MAXMEM= check box, and then change the setting to 256 (or lower if your computer has less RAM).
  5. Click OK to close the BOOT.INI Advanced Options dialog box
  6. In the System Configuration Utility dialog box, click Apply
  7. Click OK to close the System Configuration Utility dialog box
  8. Click Restart to the following message
  9. After you restart your computer, install your software as a Complete Install.
  10. After you install software, follow steps 1 through 8 to clear the /MAXMEM= check box.

reply back....

Read here more & here

but this was a temp solution.... i wasnt able to give u a permanent answer.... wait for others....
S
satya_gen #3
Jul 11, 2005 at 2:54 PM
Again same problem

Thanks for ur information saurav_cheeta,

I did this option. but till its not working.

The same error is comming,
1. Unpaking problem, check its integrity and try again.
2. Error 1335;

please give any more suggestions.
Choto Cheeta
Choto Cheeta #4
Jul 11, 2005 at 4:13 PM
1st of all get the *search.microsoft.com/search/results.aspx?st=b&na=90&View=en-us&qu=Service+Pack+2&&HL=Service+Pack+2&CM=PopularPicks&CE=popSearches]SP2[/url] installed.... & try the latest version of windows installer.....

& read this artical from HP....

get back with results....
S
satya_gen #5
Jul 12, 2005 at 11:59 AM
Software installation problem

Dear saurav_cheeta

I installed SP2 and windows installer 3.1 latest version.
Then i did what ever u told on yesterday.

but same problem again its comming.

My exact problem is,

1. The contents of this file cannot be unpacked. The executable you are attempting to run has been corrupted. Please obtain another copy of the file, verify its integrity, and try again.

(or)

2. Error 1335. The cabinet file 'Data1.cab' required for this installation is corrupt and cannot be used. This could indicate a nework error, an error reading from the CD-Rom, or a problem with this package.

For this error I did the following things,
1. Installed windows XP SP2
2. Windows installer 3.1
3. went to msconfig and change the boot.ini and change the memory to 256.
4. Copy the software to hard disk and try to install.

Since 2 months i have tryed to install the softwares, but i am not able to install my new machine.

please help me.... :(
Choto Cheeta
Choto Cheeta #6
Jul 12, 2005 at 6:08 PM
one other thing is... whether this happens to certain software?? or with every software??

if it happens with only 2 or 3 software... then might b they r corupted.... download again or copy from Digit DVD.... to install.....
S
satya_gen #7
Jul 13, 2005 at 12:08 PM
Dear saurav_cheeta

This happens to certain software only.

My problem was solved yesterday, :D

what i did was,

1. Installed DirectX 9.0c
2. Installed softwares directly from CD not from Hard Disc.

why the softwares not installing from Hard Disc? :!:

please give some suggestins...
Choto Cheeta
Choto Cheeta #8
Jul 13, 2005 at 4:48 PM
Satya said:
why the softwares not installing from Hard Disc?
Click to expand...

The 1335 error comes when the data is damaged... so may b when u copyed the DATA from ur CD to HDD it didnt went smoth... files were curropted....

Satya said:
what i did was,

1. Installed DirectX 9.0c
2. Installed softwares directly from CD not from Hard Disc.
Click to expand...

Lol.... WinXP Sp2 has DX9.0c inside... so u dont have to install it again.... & this unpacking problem has nothing to do with the DirectX.....
Choto Cheeta
Choto Cheeta #9
Jul 13, 2005 at 4:50 PM
by the way RUN a full Scan disk.... see whether ur NEW HDD has any bad sector or not....
S
satya_gen #10
Jul 15, 2005 at 5:56 PM
Dear Saurav,

sorry for the delay,

Where is the Scan Disk option in XP

Till now i didn't do that one.

Most of the sofwares doesn't install from the hard disk.

What i have to do?
Choto Cheeta
Choto Cheeta #11
Jul 15, 2005 at 11:34 PM
well open the command window....

type this command... chkdsk x: /f X is ur drive letter....