SSD Drive Issue: BSOD Error

My PC run on Windows 10 OS in ADATA XPG SX8200 Pro 256GB PCIe Gen3x4 M.2 2280 SSD...Bought on (March 6, 2019) 5 years warranty expired

My PC crashed a few times last week with a BSOD error.

After restarting the system with Bios not showing my ADATA XPG SX8200 Pro 256GB PCIe Gen3x4 M.2 2280 SSD some times

www.onlyssd.com/buy/adata-xpg-sx8200-pro-256gb-pcie-gen3x4-m-2-2280-ssd-asx8200pnp-256gt-c/?srsltid=AfmBOoq9q5xsC6pVT5coZqVKGQYebk6K1MaYCbLB2QdDm4uqKHgFU6T4

My Kaspersky shows warning issues on ADATA XPG SX8200 Pro 256GB PCIe Gen3x4 M.2 2280 SSD screenshot attached.

Other than any software to run check my SSD

KIndly Suggest

My PC config:-

Processor (CPU) - AMD RYZEN 5 2600
Motherboard (MOBO) - Msi B450 Gaming PRO Carbon AC
Graphic Card (GPU) - Nvidia Geforce GT210
Memory (RAM) - XPG SPECTRIX D40 DDR4 RGB 16GB 3000 MHZ RGB x1 -Single RAM only

Storage (SSD or HDD) :-
1. ADATA XPG SX8200 Pro (Windows 10 OS)
2. Crucial BX500 500GB 2.5-inch SATA
3. WD BLUE 1TB

Power Supply Unit (PSU) - CORSAIR TX750M
PC Case - - Cooler Master Masterbox MB511-RGB
Monitor - Lenovo L27q-10 QHD Monitor (2560x1440)
UPS - APC Back-UPS ES 650

@Desmond
@omega44-xt
@rockfella
@Minion
@whitestar_999
@billubakra
@Zangetsu
@SaiyanGoku
@quicky008
@TheSloth
@Vyom
@bssunilreddy

Can you check the Event Viewer and post the screen shot of the BSOD error once? I think your SSD is dying.
Use the ADATA SSD Toolbox software from here aKasperskynd run it to check the SSD Health once. If it shows the same like it shows in Kaspersky, then I think you need to take backup of the SSD and buy a new one.

SSD Toolbox

Yes, SSD seems to be a bad position. But before testing it more, just take backup of your files.
And then confirm if SSD is at fault by looking at SMART test or something. I can think of the software CrystalDiskInfo. You can post a screenshot of that.

shreeux said:
My PC crashed a few times last week with a BSOD error.

Do you have the exact BSOD error code?

Also, like others have suggested, check the SMART values of the drive using CrystalDiskInfo on Windows.

Check TBW of your SSD from manufacturer's website & compare it against TBW on your SSD (say if its rated for 100TBW & your SSD crossed 100TBW, manufacturer will say it may not work as intended even if it had warranty). Use Crystaldiskinfo as suggested earlier.

SSD seems to be dying, needs replacement for sure irrespective of if it is the root cause of BSOD.

bssunilreddy said:
Can you check the Event Viewer and post the screen shot of the BSOD error once? I think your SSD is dying.
Use the ADATA SSD Toolbox software from here aKasperskynd run it to check the SSD Health once. If it shows the same like it shows in Kaspersky, then I think you need to take backup of the SSD and buy a new one.

SSD Toolbox

Shows good

Vyom said:
Yes, SSD seems to be a bad position. But before testing it more, just take backup of your files.
And then confirm if SSD is at fault by looking at SMART test or something. I can think of the software CrystalDiskInfo. You can post a screenshot of that.

Shows good

Desmond said:
Do you have the exact BSOD error code?

Also, like others have suggested, check the SMART values of the drive using CrystalDiskInfo on Windows.

omega44-xt said:
Check TBW of your SSD from manufacturer's website & compare it against TBW on your SSD (say if its rated for 100TBW & your SSD crossed 100TBW, manufacturer will say it may not work as intended even if it had warranty). Use Crystaldiskinfo as suggested earlier.

SSD seems to be dying, needs replacement for sure irrespective of if it is the root cause of BSOD.

It was TBW value for 1TB
AS OF NOW, 256GB discontinued

shreeux said:
Shows good

NVMe SSD: I can see a bright night coming faster than expected. Now it's time to call the USB guy to write the final chapter, keep it in a safe zone, and open it when I stop...

My SanDisk SSD is 9yrs old and still going strong.
Check the SSD for any bad data sector which might be causing the BSOD error

Zangetsu said:
My SanDisk SSD is 9yrs old and still going strong.
Check the SSD for any bad data sector which might be causing the BSOD error

how?
any software?

shreeux said:
It was TBW value for 1TB
AS OF NOW, 256GB discontinued

Likely 160TBW is the TBW limit for the 256GB variant. 90TBW is not dangerous. It might be failing because of something else. Troubleshooting is a pain. Not sure if you can pin the issues on SSD with 100% certainty but can replace it & see if issues are resolved.

omega44-xt said:
Likely 160TBW is the TBW limit for the 256GB variant. 90TBW is not dangerous. It might be failing because of something else. Troubleshooting is a pain. Not sure if you can pin the issues on SSD with 100% certainty but can replace it & see if issues are resolved.

How 90TBW ?

Can I reinstall Windows 10 OS to resolve the BSOD error? OR Windows 11?

As of now, which is good one, SSD M.2 as per my motherboard?

Check similar problem in MS forums:*answers.microsoft.com/en-us/windows/forum/all/eventid-327686008/1360ecaa-240c-416a-a5c3-7cd3d8901d85
Here they are saying problem might be with either RAID controller or PSU or updating windows or upgrading display drivers but in your case the NVME health is too low
Actually Event ID 32768>6008 error is triggered if the computer was shut down forcefully using remote shutdown tool or automatically by a third-party program without the user request.
Did you update your mobos bios to the latest version? If not do it.

shreeux said:
How 90TBW ?

Can I reinstall Windows 10 OS to resolve the BSOD error? OR Windows 11?

As of now, which is good one, SSD M.2 as per my motherboard?

Check re-installing Win10 or 11 once but I think since your Mobo supports the below storage configuration its better to go with any NVME SSD like Crucial P3 Plus 1TB PCIe 4.0 3D NAND NVMe M.2 SSD CT1000P3PSSD8 @ 4.8k

1 x M.2 slot (M2_1, Key M)1
- Supports PCIe 3.0 x4 (1st, 2nd and 3rd Gen AMD Ryzen™/ Ryzen™ with Radeon™ Vega Graphics and 2nd Gen AMD Ryzen™ with Radeon™ Graphics) or PCIe 3.0 x2 (Athlon™ with Radeon™ Vega Graphics) and SATA 6Gb/s 2242/ 2260 /2280/ 22110 storage devices
2 x SATA 6Gb/s ports1

PCI_E2, PCI_E3, PCI_E4 and PCI_E5 slots will be unavailable when installing M.2 PCIe SSD in M2_2 slot.
SATA5 and SATA6 ports will be unavailable when installing a M.2 device in M2_1 slot.

bssunilreddy said:
Check similar problem in MS forums:*answers.microsoft.com/en-us/windows/forum/all/eventid-327686008/1360ecaa-240c-416a-a5c3-7cd3d8901d85
Here they are saying problem might be with either RAID controller or PSU or updating windows or upgrading display drivers but in your case the NVME health is too low
Actually Event ID 32768>6008 error is triggered if the computer was shut down forcefully using remote shutdown tool or automatically by a third-party program without the user request.
Did you update your mobos bios to the latest version? If not do it.

link not working

bssunilreddy said:
Check re-installing Win10 or 11 once but I think since your Mobo supports the below storage configuration its better to go with any NVME SSD like Crucial P3 Plus 1TB PCIe 4.0 3D NAND NVMe M.2 SSD CT1000P3PSSD8 @ 4.8k

1 x M.2 slot (M2_1, Key M)1

Supports PCIe 3.0 x4 (1st, 2nd and 3rd Gen AMD Ryzen™/ Ryzen™ with Radeon™ Vega Graphics and 2nd Gen AMD Ryzen™ with Radeon™ Graphics) or PCIe 3.0 x2 (Athlon™ with Radeon™ Vega Graphics) and SATA 6Gb/s 2242/ 2260 /2280/ 22110 storage devices

2 x SATA 6Gb/s ports1

PCI_E2, PCI_E3, PCI_E4 and PCI_E5 slots will be unavailable when installing M.2 PCIe SSD in M2_2 slot.

SATA5 and SATA6 ports will be unavailable when installing a M.2 device in M2_1 slot.

How to interpret...?

If I fix 2 NVME M.2 in 2 slot will not work?

shreeux said:
link not working

link working while using chrome browser. Okay. I PMed you.

shreeux said:
How to interpret...?

If I fix 2 NVME M.2 in 2 slot will not work?

If you use main M.2 slot then SATA5 & SATA6 will not work.
If you use 2nd M.2 slot then PCIE2, PCIE3, PCIE4 & PCIE5 slots will not work.
That means main PCIE slot which you use to insert the GPU will work. Okay.

bssunilreddy said:
If you use main M.2 slot then SATA5 & SATA6 will not work.
If you use 2nd M.2 slot then PCIE2, PCIE3, PCIE4 & PCIE5 slots will not work.
That means main PCIE slot which you use to insert the GPU will work. Okay.

As per attached file...

I am using SLOT 1 M.2 for NVME SSD
PCIE 1 for Graphics Card
For 6 Sata Ports, now used Sata Port1 and Sata Port2 only

Remaing Sata Port 3,4,5,6 not used
Remaing PCIE2, PCIE3, PCIE4 & PCIE5 not used

So, can I add 1 more SLOT 2 M.2 for NVME SSD?

shreeux said:
As per attached file...

I am using SLOT 1 M.2 for NVME SSD
PCIE 1 for Graphics Card
For 6 Sata Ports, now used Sata Port1 and Sata Port2 only

Remaing Sata Port 3,4,5,6 not used
Remaing PCIE2, PCIE3, PCIE4 & PCIE5 not used

So, can I add 1 more SLOT 2 M.2 for NVME SSD?

Yes you can.

shreeux said:
How 90TBW ?

Can I reinstall Windows 10 OS to resolve the BSOD error? OR Windows 11?

As of now, which is good one, SSD M.2 as per my motherboard?

90TBW is mentioned in your CrystalDiskInfo screenshot

This week again, face with BSOD issues.
So, Finally bought

EVM M.2 NVMe Internal SSD (2280) - 2000MB/s Read - PCIe Interface Gen 3x4-4X Faster Than SATA SSD- 5 Year Warranty, 256GB @
1500/-

After that, install a fresh Windows 10 OS... No issues till then... Lets see

Now, Kaspersky shows good health on this drive

That a good brand?

Desmond said:
That a good brand?

Its reputed only
WD has a 3-year warranty... So I blindly bought the EVM 5-year warranty.

In 2019, ADATA XPG 256GB bought at ₹5,350.

One more doubt:

I am using Privazer software to clean and delete every single file through secure deletion... Avoid residual traces of old files remaining in free space.

www.privazer.com/en/index.php

Will it affect the SSD drive?

Is that the reason for SSD drive failure?

bssunilreddy said:
Yes you can.

After PC working fine with new M.2 SSD in M.2-1st Slot

I insert my existing NVME M.2 SSD...in M.2 Slot. PC on no display in Monitor... I don't know why?

shreeux said:
One more doubt:

I am using Privazer software to clean and delete every single file through secure deletion... Avoid residual traces of old files remaining in free space.

www.privazer.com/en/index.php

Will it affect the SSD drive?

Is that the reason for SSD drive failure?

Could be. Technically such secure delete software work by not only dislocating the pointers for the files but also writing null or zero values over the locations where the files were.

Again, the system lags sometimes and restarts with the default 800x600 resolution mode. Later, a few minutes later, change to 1920x1200.

How to check GPU condition?
Any software?

How to check DDR4 RAM?
Any software?

shreeux said:
Again, the system lags sometimes and restarts with the default 800x600 resolution mode. Later, a few minutes later, change to 1920x1200.

Looks like GPU driver issue. Which GPU?

shreeux said:
How to check GPU condition?
Any software?

I doubt there's any. You could just uninstall and re-install your drivers.

shreeux said:
How to check DDR4 RAM?
Any software?

Memtest86

Desmond said:
Looks like GPU driver issue. Which GPU?

I doubt there's any. You could just uninstall and re-install your drivers.

Memtest86

I think, as per my PC configuration, the Nvidia Geforce GT210 is not loadable in current situation

Yesterday again, system lagging...While checking This PC....one partition not showing in WD BLUE 1TB hard disk.
After system restart and checking in BIOS....WD BLUE 1TB hard disk not showing,
So, I disconnected from my PC ... Now PC working fine... Lets see...

What to do with WD Blue 1TB hard disk...some time will work fine.,

As of now, my 2 storage drive are failing.
1. ADATA XPG SX8200 Pro M.2 NVME 256GB
2. WD BLUE 1TB

Need to add internal storage future proof....HDD or SSD.

kindly suggest as per my PC config

My PC config:-

Processor (CPU) - AMD RYZEN 5 2600
Motherboard (MOBO) - Msi B450 Gaming PRO Carbon AC
Graphic Card (GPU) - Nvidia Geforce GT210
Memory (RAM) - XPG SPECTRIX D40 DDR4 RGB 16GB 3000 MHZ RGB x1 -Single RAM only

Storage (SSD or HDD) :-
1. ADATA XPG SX8200 Pro (Windows 10 OS)
2. Crucial BX500 500GB 2.5-inch SATA
3. WD BLUE 1TB

Power Supply Unit (PSU) - CORSAIR TX750M
PC Case - - Cooler Master Masterbox MB511-RGB
Monitor - Lenovo L27q-10 QHD Monitor (2560x1440)
UPS - APC Back-UPS ES 650

shreeux said:
As of now, my 2 storage drive are failing.
1. ADATA XPG SX8200 Pro M.2 NVME 256GB
2. WD BLUE 1TB

Need to add internal storage future proof....HDD or SSD.

kindly suggest as per my PC config

My PC config:-

Processor (CPU) - AMD RYZEN 5 2600
Motherboard (MOBO) - Msi B450 Gaming PRO Carbon AC
Graphic Card (GPU) - Nvidia Geforce GT210
Memory (RAM) - XPG SPECTRIX D40 DDR4 RGB 16GB 3000 MHZ RGB x1 -Single RAM only

Storage (SSD or HDD) :-
1. ADATA XPG SX8200 Pro (Windows 10 OS)
2. Crucial BX500 500GB 2.5-inch SATA
3. WD BLUE 1TB

Power Supply Unit (PSU) - CORSAIR TX750M
PC Case - - Cooler Master Masterbox MB511-RGB
Monitor - Lenovo L27q-10 QHD Monitor (2560x1440)
UPS - APC Back-UPS ES 650

Since you have 2 M.2 slots buy any good M.2
You blindly bought EVM M.2 as it was giving 5 years warranty. But did you read any RMA reports of it from reddit or any forums?
I thought I could suggest you WD SN580 1TB NVME. I am using SN570 since 5 years and no probs what so ever.
Search/ask in TE for open box sales and buy. Okay.

shreeux said:
Yesterday again, system lagging...While checking This PC....one partition not showing in WD BLUE 1TB hard disk.
After system restart and checking in BIOS....WD BLUE 1TB hard disk not showing,
So, I disconnected from my PC ... Now PC working fine... Lets see...

What to do with WD Blue 1TB hard disk...some time will work fine.,

I am also getting the same errors as you are getting in your event viewer like below

The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID
{2593F8B9-4EAF-457C-B68A-50F6B8EA6B54}
and APPID
{15C20B67-12E7-4BB6-92BB-7AFF07997402}
to the user Bavusani\bavusani SID (S-1-5-21-37121029-2211338798-1128203491-1001) from address LocalHost (Using LRPC) running in the application container MicrosoftWindows.Client.WebExperience_525.1301.30.0_x64__cw5n1h2txyewy SID (Unavailable). This security permission can be modified using the Component Services administrative tool.

But I used to get even more serious errors like Azure server activation errors: file not found and my PC used to either crash, freeze or restart even while normal browsing. So I combed through reddit, amd & ms forums and did a number of tweaks and disabled the AMDfTPM in bios for all crashes to stop.
In Cyberpunk 2077 its always giving me flatlined after playing for 5 mins also & also in Witcher 3. But while playing Wolfenstein games it didnt crash or restart but froze once. So I stopped playing games altogether and thinking of upgrading my setup to AM5 and a new GPU.
Update: I read in AMD & MS forums about users having AM4 PC users complaining that nor AMD neither MS are providing fixes to these issues through Bios updates or Windows Updates.

bssunilreddy said:
Since you have 2 M.2 slots buy any good M.2
You blindly bought EVM M.2 as it was giving 5 years warranty. But did you read any RMA reports of it from reddit or any forums?
I thought I could suggest you WD SN580 1TB NVME. I am using SN570 since 5 years and no probs what so ever.
Search/ask in TE for open box sales and buy. Okay.

I installed fresh Windows 10 OS on new EVM M.2 and inserted in M.2 ( 1st slot in my Motherboard below processor)

After PC working fine...

I inserted exiting ADATA XPG SX8200 Pro M.2 NVME in M.2 (2nd slot in my Motherboard end).

When checking in Bios...M.2, the 2nd slot shows empty, as does disk management.

So, I kept ADATA XPG SX8200 Pro M.2 NVME idling without use

Any NVMW enclosure buying suggestions? To use like external storage?

bssunilreddy said:
I am also getting the same errors as you are getting in your event viewer like below

The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID
{2593F8B9-4EAF-457C-B68A-50F6B8EA6B54}
and APPID
{15C20B67-12E7-4BB6-92BB-7AFF07997402}
to the user Bavusani\bavusani SID (S-1-5-21-37121029-2211338798-1128203491-1001) from address LocalHost (Using LRPC) running in the application container MicrosoftWindows.Client.WebExperience_525.1301.30.0_x64__cw5n1h2txyewy SID (Unavailable). This security permission can be modified using the Component Services administrative tool.

But I used to get even more serious errors like Azure server activation errors: file not found and my PC used to either crash, freeze or restart even while normal browsing. So I combed through reddit, amd & ms forums and did a number of tweaks and disabled the AMDfTPM in bios for all crashes to stop.
In Cyberpunk 2077 its always giving me flatlined after playing for 5 mins also & also in Witcher 3. But while playing Wolfenstein games it didnt crash or restart but froze once. So I stopped playing games altogether and thinking of upgrading my setup to AM5 and a new GPU.
Update: I read in AMD & MS forums about users having AM4 PC users complaining that nor AMD neither MS are providing fixes to these issues through Bios updates or Windows Updates.

Again, PC troubling and restart... Yesterday, 2 times, I installed a fresh Windows OS.

After connecting WD BLUE 1TB, after entering Windows OS, some lagging and heard tik noise from WD BLUE 1TB.

After restart, all drives are not shown in BIOS. So, disconnected all drives and connections.

I switched the GPU to another slot and connected drives one by one on every restart.

Now all drives show up in Windows.

1. EVM M.2 NVME 256GB (Windows 10 OS)
2. Crucial BX500 500GB 2.5-inch SATA
3. WD BLUE 1TB

Are you suggesting... disable TPM in my bios?

shreeux said:
I installed fresh Windows 10 OS on new EVM M.2 and inserted in M.2 ( 1st slot in my Motherboard below processor)

After PC working fine...

I inserted exiting ADATA XPG SX8200 Pro M.2 NVME in M.2 (2nd slot in my Motherboard end).

When checking in Bios...M.2, the 2nd slot shows empty, as does disk management.

So, I kept ADATA XPG SX8200 Pro M.2 NVME idling without use

Any NVMW enclosure buying suggestions? To use like external storage?

For NVME enclosure you can go with this:
From Amazon its Rs.999 -*www.amazon.in/NVME-Enclosure-PiBOX-India-NVMe/dp/B0CJNXWVWT?th=1
From PiBox website its Rs.797 -*pibox.in/product/nvme-m2-enclosure-pibox-india-nvme-ssd-enclosure-usb-3-2-10gbps-tool-free-m-2-nvme-case-pci-e-nvme-reader-usb-c-supports-m-bm-keys-2230-2242-2260-2280-ssds-realtek-rtl9210-chipset/?srsltid=AfmBOoqR3goHS5UU3YtBIKLbcbbNYE7jhGE3lY-njGLRxkLsIuzAc5_z
But I bought a 2nd hand Orico NVME enclosure from TechEnclave for Rs.600 last year.

shreeux said:
Again, PC troubling and restart... Yesterday, 2 times, I installed a fresh Windows OS.

After connecting WD BLUE 1TB, after entering Windows OS, some lagging and heard tik noise from WD BLUE 1TB.

After restart, all drives are not shown in BIOS. So, disconnected all drives and connections.

I switched the GPU to another slot and connected drives one by one on every restart.

Now all drives show up in Windows.

1. EVM M.2 NVME 256GB (Windows 10 OS)
2. Crucial BX500 500GB 2.5-inch SATA
3. WD BLUE 1TB

Are you suggesting... disable TPM in my bios?

It seems that either yours GPU or PCI-E slot is troublesome.
For Windows 10 OS you dont need to switch off the TPM because Windows 11 24H2 requirement is TPM & Secure Boot to be enabled before installing the OS.
Are you still getting "The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID" error even now? If so just leave it because the errors with yellow triangle symbols are not critical errors. If you are getting red triangle symbols in event viewer then you need to be concerned. Okay.
Regarding getting lags means your GPU or the PCI-E slot problem.Okay.

bssunilreddy said:
For NVME enclosure you can go with this:
From Amazon its Rs.999 -*www.amazon.in/NVME-Enclosure-PiBOX-India-NVMe/dp/B0CJNXWVWT?th=1
From PiBox website its Rs.797 -*pibox.in/product/nvme-m2-enclosure-pibox-india-nvme-ssd-enclosure-usb-3-2-10gbps-tool-free-m-2-nvme-case-pci-e-nvme-reader-usb-c-supports-m-bm-keys-2230-2242-2260-2280-ssds-realtek-rtl9210-chipset/?srsltid=AfmBOoqR3goHS5UU3YtBIKLbcbbNYE7jhGE3lY-njGLRxkLsIuzAc5_z
But I bought a 2nd hand Orico NVME enclosure from TechEnclave for Rs.600 last year.

Worth buying PiBox compared to others?

I would advise to get a backup of most important data first and foremost!!
Its bizarre that all your disks are failing together!
Personally I have one Orico SSD enclosure and it works fine. But you should read the last 1 year reviews on Amazon and then decide which enclosure to buy.

Yesterday again… My PC is unable to log in to the Windows 10 OS.

I check in Bios… All disks are shown properly.

When I reboot and select the Windows installation disk while pressing F11.

Unable to log in, the system restarts again or sometimes shows a BSOD.

I tried to repair the Windows OS and system restore… Nothing worked.

Finally… Installed again Fresh Windows 10 OS.

unable to resolve this issues?

shreeux said:
Yesterday again… My PC is unable to log in to the Windows 10 OS.

I check in Bios… All disks are shown properly.

When I reboot and select the Windows installation disk while pressing F11.

Unable to log in, the system restarts again or sometimes shows a BSOD.

I tried to repair the Windows OS and system restore… Nothing worked.

Finally… Installed again Fresh Windows 10 OS.

unable to resolve this issues?

It seems your PSU isn't able to take the load. For me also same happened. I wracked my brains and then somebody from TE told me check OCCT PSU power test and when I did it restarted within 5 mins and after I replaced it with a new PSU and did the same test , it ran without restarting.
Later I think because of either AMD or MS not giving support for older AM4 hardware for problems that arose my PC used to freeze and give BSODs so I tried to eliminate one problem at a time. While playing Cyberpunk or Witcher 3 it flatlines and tells me to send diagnostic data to AMD. So I again searched through AMD & MS forums and found that AMDfTPM is causing problems which AMD or MS should have solved the problem by giving an update but they did not since its EOL platform. So now I stopped playing games and am only browsing forums or reddit likewise and now those flatlining stopped.
I am in the process of moving into another new platform. So keeping my fingers crossed.
Did you check the SSD also once. I read somewhere that updating the SSD software solved the crashing to some. I mean like Kingston Fury Renegade NVME SSD and Patriot Viper NVME SSD. So check also this once. Okay.

shreeux said:
Yesterday again… My PC is unable to log in to the Windows 10 OS.

I check in Bios… All disks are shown properly.

When I reboot and select the Windows installation disk while pressing F11.

Unable to log in, the system restarts again or sometimes shows a BSOD.

I tried to repair the Windows OS and system restore… Nothing worked.

Finally… Installed again Fresh Windows 10 OS.

unable to resolve this issues?

Again, the next day, same issues... After PC restart...OS is corrupt or cannot log in to the Windows 10 OS.

As usual, all drives are shown in BIOS.

Resetting the PC with the Select Remove Everything option downloads a fresh copy of Windows from the cloud.

I do some modification as per the attached file.

shreeux said:
Again, the next day, same issues... After PC restart...OS is corrupt or cannot log in to the Windows 10 OS.

As usual, all drives are shown in BIOS.

Resetting the PC with the Select Remove Everything option downloads a fresh copy of Windows from the cloud.

I do some modification as per the attached file.

The problem should be in corrupt OS or SSD or hardware like mobo or PSU.
Did you download a fresh OS using a USB pen drive?

bssunilreddy said:
The problem should be in corrupt OS or SSD or hardware like mobo or PSU.
Did you download a fresh OS using a USB pen drive?

Yes, I think OS Corrupt.
Yes...Download fresh OS USB pen drive

*support.microsoft.com/en-us/windows/reset-your-pc-0ef73740-b927-549b-b7c9-e6f2b48d275e

Again, yesterday, the same issues... After a PC restart...the OS is corrupt, or the PC cannot log in to the Windows 10 OS.

After searching web...Again some tweaks in OS...Lets see

I tries to install Windows 11 on existing M.2 Nvme....Unable to Install.

When UEFI settings in Bios....After restart PC shows this error...."There is no GOP supported in this card"...What to do?

When CSM settings in BIOS...after restart, the PC...Try to install Windows 11...shows error...unable to format dirve. Also try with command prompt to delete and format drive...Drives not shown in list

Pls check attached file

I have not read the entire thread. Am just referring to the above post.

Windows 11 (though not documented) actually has MBR bootloader and it can boot in Legacy (CSM) mode!
However to my knowledge (Though I have never tested it myself) 'NVMe drives + Windows' require UEFI for booting.

So if at all you want Windows 11 in Legacy mode, Rufus can still create the USB key for you, but you would mostly need a SATA drive.
Try creating BIOS Legacy bootable Windows 11 USB key using Rufus and see if it works with NVMe in CSM Mode. Else try a SATA drive.
For legacy mode, drive should be initialized as MBR not GPT (If it was already initialized to GPT, you need to change it to MBR)

Again, yesterday when switched of PC. Display switch of in Monitor...CPU running ON continuously.
Forced to switched on CPU, Again switched on PC...CPU running ON, No Display on Monitor.

Went to friend house, Replace with another RAM & GPU. Still same issues,
CPU running ON, No Display on Monitor.

Finally, went to Ritchie street handover CPU to known service centre.
He, checked all parameters, said Motherboard is problem. Need time to check again,will try if repairable or not.

My question
If not repairable, Kindly suggest suitable MOTHERBOARD for my existing PC components
or
Any Suggestions

My PC config:-

Processor (CPU) - AMD RYZEN 5 2600
Motherboard (MOBO) - Msi B450 Gaming PRO Carbon AC
Graphic Card (GPU) - Nvidia Geforce GT210
Memory (RAM) - -Adata XPG Spectrix D60G 16GB (16GBX1) DDR4 3200MHz..(AX4U320016G16A-ST60).... Single RAM only.

Storage (SSD or HDD) :-
1. EVM M.2 NVME 256GB (Windows 10 OS)
2. BX500 500GB 2.5-inch SATA
3. WD BLUE 1TB

Power Supply Unit (PSU) - CORSAIR TX750M
PC Case - - Cooler Master Masterbox MB511-RGB
Monitor - Lenovo L27q-10 QHD Monitor (2560x1440)
UPS - APC Back-UPS ES 650

@Desmond
@omega44-xt
@rockfella
@Minion
@whitestar_999
@billubakra
@Zangetsu
@SaiyanGoku
@quicky008
@TheSloth
@Vyom
@bssunilreddy
@patkim

shreeux said:
Again, yesterday when switched of PC. Display switch of in Monitor...CPU running ON continuously.
Forced to switched on CPU, Again switched on PC...CPU running ON, No Display on Monitor.

Went to friend house, Replace with another RAM & GPU. Still same issues,
CPU running ON, No Display on Monitor.

Finally, went to Ritchie street handover CPU to known service centre.
He, checked all parameters, said Motherboard is problem. Need time to check again,will try if repairable or not.

My question
If not repairable, Kindly suggest suitable MOTHERBOARD for my existing PC components
or
Any Suggestions

My PC config:-

Processor (CPU) - AMD RYZEN 5 2600
Motherboard (MOBO) - Msi B450 Gaming PRO Carbon AC
Graphic Card (GPU) - Nvidia Geforce GT210
Memory (RAM) - -Adata XPG Spectrix D60G 16GB (16GBX1) DDR4 3200MHz..(AX4U320016G16A-ST60).... Single RAM only.

Storage (SSD or HDD) :-
1. EVM M.2 NVME 256GB (Windows 10 OS)
2. BX500 500GB 2.5-inch SATA
3. WD BLUE 1TB

Power Supply Unit (PSU) - CORSAIR TX750M
PC Case - - Cooler Master Masterbox MB511-RGB
Monitor - Lenovo L27q-10 QHD Monitor (2560x1440)
UPS - APC Back-UPS ES 650

@Desmond
@omega44-xt
@rockfella
@Minion
@whitestar_999
@billubakra
@Zangetsu
@SaiyanGoku
@quicky008
@TheSloth
@Vyom
@bssunilreddy
@patkim

If you want B550 then go with this: *computechstore.in/product/msi-b550m-pro-vdh-wifi-motherboard/ @ ₹9.4k
If you want to go with B450 then this: *computechstore.in/product/gigabyte-b450m-ds3h-wifi-motherboard/ @ ₹7.7k

bssunilreddy said:
If you want B550 then go with this: *computechstore.in/product/msi-b550m-pro-vdh-wifi-motherboard/ @ ₹9.4k

B550 doesn't support 2000 series CPU, same goes for A520 as well. At least not officially.

nac said:
B550 doesn't support 2000 series CPU, same goes for A520 as well. At least not officially.

They mentioned 500 series

shreeux said:
They mentioned 500 series

Check CPU compatibility of the board you're eyeing from the manufacturers site. Though there are users claim that they are using 2000 series Ryzen with B550. You're already facing tonne load of issues, you don't wanna do a trial and error in this new purchase.

nac said:
Check CPU compatibility of the board you're eyeing from the manufacturers site. Though there are users claim that they are using 2000 series Ryzen with B550. You're already facing tonne load of issues, you don't wanna do a trial and error in this new purchase.

Any specific sites to check all compatibility?

shreeux said:
Any specific sites to check all compatibility?

The board makers site. Asus, Gigabyte, MSI, Asrock.

nac said:
The board makers site. Asus, Gigabyte, MSI, Asrock.

Again don't like go with MSI
other than MSI... Which one is preferable...also good after sales service

shreeux said:
Again don't like go with MSI
other than MSI... Which one is preferable...also good after sales service

Personally I have used Asus and MSI both worked/works fine. And I don't have first hand experience wrt after sales/service of motherboard, what I can give you is my opinion (which differs person to person) based on the things I read online. It's mostly mixed regardless of brand, but personally I would rate Asus>Gigabyte>MSI>Asrock.

At this point you may not have the luxury of picking brands, you gotta go with what's available.

nac said:
Personally I have used Asus and MSI both worked/works fine. And I don't have first hand experience wrt after sales/service of motherboard, what I can give you is my opinion (which differs person to person) based on the things I read online. It's mostly mixed regardless of brand, but personally I would rate Asus>Gigabyte>MSI>Asrock.

At this point you may not have the luxury of picking brands, you gotta go with what's available.

As per my processor Ryzen 5 2600 only B450 Motherboard support. As of now only Micro ATX available.

As of now, I chooses this MB... Remaining all are very old
Gigabyte B450M K (rev. 2.0) motherboard was released in 2022.

Hmmm, GB B450M K and Asus Prime seems to be around same tier.

@Everyone, GB B450M K and Asus prime series are safe choice?

GB is fine, if you can add little bit more money then GB DS3H is decent mobo.

*www.vedantcomputers.com/gigabyte-b450m-ds3h-wifi-motherboard

TheSloth said:
@Everyone, GB B450M K and Asus prime series are safe choice?

If none available what to do... Yes, D23H is a better choice.

TheSloth said:
Hmmm, GB B450M K and Asus Prime seems to be around same tier.

@Everyone, GB B450M K and Asus prime series are safe choice?

GB is fine, if you can add little bit more money then GB DS3H is decent mobo.

**www.vedantcomputers.com/gigabyte-b450m-ds3h-wifi-motherboard

nac said:
If none available what to do... Yes, D23H is a better choice.

Gigabyte B450M DS3H Wifi Motherboard is 2018 model. No need wifi... using LAN,.
As of now going with least one for few years. Later will built new configuration.
This was built in 2019

Make sense to spend less on old build; let's wait for others to confirm on the quality of GB B450M K model, or suggest another mobo

shreeux said:
Finally, went to Ritchie street handover CPU to known service centre.
He, checked all parameters, said Motherboard is problem. Need time to check again,will try if repairable or not.

They eventually fixed my motherboard more than a week later.

They switched to a different version of the BIOS because they claimed it was corrupt.

I looked at the BIOS. It's the same version... A few months ago, I received an update

A few days later, the computer is operating without any issues. No problems.