DIGIT-ARC read-only archive · snapshot: July 23, 2026

Suggest Third party cooler for XFX HD 5670

9 posts · originally from https://geek.digit.in/community/threads/suggest-third-party-cooler-for-xfx-hd-5670.186845/

B
bl4cK_d3Mon Original post #1
Sep 8, 2014 at 11:53 AM
hello
recently my HD 5670 fan is broken and its temp goes above 80
and its not in warranty period so i need a good third party cooler for my graphics card btw the vendor is XFX (if it matters)
coderunknown
Sep 8, 2014 at 12:56 PM
had a Sapphire 5670 where the cooler failed too. gave it to a local repair shop. they wired a Intel fan (without the heatsink) into the GPU heatsink. Temperature was well within limits. may give it a try. cost me just 100 bucks. ran for 8-9 months before the GPU itself died.
B
Sep 8, 2014 at 1:27 PM
had a Sapphire 5670 where the cooler failed too. gave it to a local repair shop. they wired a Intel fan (without the heatsink) into the GPU heatsink. Temperature was well within limits. may give it a try. cost me just 100 bucks. ran for 8-9 months before the GPU itself died.
err 8-9 month
how about cooler master coolvivaZ1
coderunknown
Sep 8, 2014 at 1:46 PM
a passive cooler is not going to help here. 5670 is really old and spending more money on a new cooler doesn't feels right. btw how much this cooler costs?

in my case, the GPU died due to faulty PSU, not overheating. so if the gpu temps can be kept within limits you may extract a couple of years out of it but consider upgrading.
T
Sep 10, 2014 at 1:25 PM
Spending anything more than 3 digit figure for a 5670 is waste imo. Better get a new card altogether if cooler is 4 digit.
harshilsharma63
Sep 10, 2014 at 5:19 PM
Just fix one or maybe two 80 mm or 60 mm fans with cable ties or anyhow and you are good to go.
topgear
topgear #7
Sep 11, 2014 at 6:49 AM
Just fix one or maybe two 800 mm or 60 mm fans with cable ties or anyhow and you are good to go.

that would be worlds largest gpu cooler fan anyone ever seen :D ;)
TheGibMaker
Sep 23, 2014 at 9:45 PM
Man up and liquid cool that sucker! ;) EK waterblocks FTW!
Jokes aside, get a shroud from a dead card, replaced the TIM, tighten it up and you're good to go.