DIGIT-ARC read-only archive · snapshot: July 23, 2026

Suggestions required for upgrade blues !

11 posts · originally from https://geek.digit.in/community/threads/suggestions-required-for-upgrade-blues.108737/

T
trishulpani Original post #1
Feb 15, 2009 at 1:37 AM
Hi all,

I really need to upgrade my system and i have a config in mind(I am in favor of an AMD based system since AM3 ready boards will support most of AMD processors - current and upcoming ones). Just to be frank, this machine will not be used for hardcore gaming.

I do not have sufficient funds for a full fledged upgrade and I only wish to build the machine incrementally. I want to spend the most on a good motherboard, RAM and a PSU.I have given my justification against each of my choice below. Please let me know your opinion.

Motherboard : Jetway MA3-79GDG COMBO (This is latest motherboard from Jetway supporting both DDr2 & DDR3, HD3300
integrated graphics, supports a wide range of AMD processors right from AM2, AM2+ and AM3 socket CPUs, has 128 MB sideport memory, HDMI, DV-I and is Crossfire ready)
I don't know whether this mobo is available in India yet but Jetway site says Rashi Peripherals is the distributor
in India. I am assuming this one will cost around 6k.

The other one that I have in mind is the Biostar TA790GX A3 (supports only DDR3, HDMI, HD3300, sideport memory etc).
With the same feature set the Gigabyte GA-MA 790 GP-DS4H is way to pricey (almost 9.5k)
I hope I could make myself clear on this one. DDR3 is overpriced at present but its the future. HDMI is inevitable. I can also add the HD4850 when I am able to . So I am betting on hybrid motherboards like that of Jetway's.

Processor: I can do with an AMD 5000+ for now (price around INR 2.8k) [if i get the above motherboard, i can always upgrade to the 45nm AMD cpus later in the year]

RAM: Corsair CM2X2048-6400C5(1 X 2GB DDR2 800MhZ C5)
Here's the best part - I can go with a better DDR2 ram for now since the Jetway has 2 DDR2 and 2 DDR3 slots, I can
also upgrade to DDR 3 in the near future.

PSU/SMPS: Coolermaster RS500-PCARA3 (ExtremePower 500W) - No compromise on this one. I plan to add a HD4850 soon and
I am sure i'll need this.

Approx. cost = 6k + 2.8k + 1.7k+2.8k= INR 13.3k
[all prices, expcept for the mobo is based on those from www.theitwares.com]

The rest of the components I can reuse from my current machine.

Thanks,
TP
V
Feb 15, 2009 at 2:58 AM
^^
Corsair CMPSU-450VX or Antec EA-650-Sli will be much better psu considering future upgradibility.
T
Feb 16, 2009 at 12:25 PM
thanks for the suggestion.....vvikas...i just wonder if this will be available in Kolkata...
V
Feb 16, 2009 at 1:22 PM
you can also get it from here if cant find locally
*www.lynx-india.com/index.php?productID=477
*www.lynx-india.com/index.php?productID=2120
T
Feb 16, 2009 at 10:40 PM
thanks again for taking out time to point to this great site...i've already started a hunt for the said components ... :)
Psychosocial
Feb 16, 2009 at 10:55 PM
Hi all,

I really need to upgrade my system and i have a config in mind(I am in favor of an AMD based system since AM3 ready boards will support most of AMD processors - current and upcoming ones). Just to be frank, this machine will not be used for hardcore gaming.

I do not have sufficient funds for a full fledged upgrade and I only wish to build the machine incrementally. I want to spend the most on a good motherboard, RAM and a PSU.I have given my justification against each of my choice below. Please let me know your opinion.

Motherboard : Jetway MA3-79GDG COMBO (This is latest motherboard from Jetway supporting both DDr2 & DDR3, HD3300
integrated graphics, supports a wide range of AMD processors right from AM2, AM2+ and AM3 socket CPUs, has 128 MB sideport memory, HDMI, DV-I and is Crossfire ready)
I don't know whether this mobo is available in India yet but Jetway site says Rashi Peripherals is the distributor
in India. I am assuming this one will cost around 6k.

The other one that I have in mind is the Biostar TA790GX A3 (supports only DDR3, HDMI, HD3300, sideport memory etc).
With the same feature set the Gigabyte GA-MA 790 GP-DS4H is way to pricey (almost 9.5k)
I hope I could make myself clear on this one. DDR3 is overpriced at present but its the future. HDMI is inevitable. I can also add the HD4850 when I am able to . So I am betting on hybrid motherboards like that of Jetway's.

Processor: I can do with an AMD 5000+ for now (price around INR 2.8k) [if i get the above motherboard, i can always upgrade to the 45nm AMD cpus later in the year]

RAM: Corsair CM2X2048-6400C5(1 X 2GB DDR2 800MhZ C5)
Here's the best part - I can go with a better DDR2 ram for now since the Jetway has 2 DDR2 and 2 DDR3 slots, I can
also upgrade to DDR 3 in the near future.

PSU/SMPS: Coolermaster RS500-PCARA3 (ExtremePower 500W) - No compromise on this one. I plan to add a HD4850 soon and
I am sure i'll need this.

Approx. cost = 6k + 2.8k + 1.7k+2.8k= INR 13.3k
[all prices, expcept for the mobo is based on those from www.theitwares.com]

The rest of the components I can reuse from my current machine.

Thanks,
TP

Go for Transcend DDR2 800MHz RAM. Will save you money and the performance will be around the same as Corsair. Go for the Jetway mobo... its the best in the lot. CM EP 500W is a nice PSU, you cant go wrong there. Why dont you try and get the AMD X3 8450 instead of X2 5000+ ?
T
Feb 16, 2009 at 11:30 PM
Thanks bro!!
That gives me some confidence that my homework was upto the mark.

Also, m not going for the X3 mainly because
1) in gaming, the graphics card matters more than the processor
2)there aren't many applications that are made to run on even two cores (leave alone a 3 core) - and its also a bit phsychological as well - u see, there were many reportings on the net that the AMD X3 is nothing but a quad core with one non-functional (defective) core.

Anyways, the main aim is to save for the HD 4850 Sonic :D.
And yes, i'll go for the transcend as suggested.

Thanks again,
TP
T
Feb 17, 2009 at 12:16 AM
Well, in that case i'll go with what u suggested.
Btw, wht happened to ur CM ... did it conk out before the warranty ??
V
vvikas28 #10
Feb 17, 2009 at 12:39 AM
it was on my brothers sys. under warranty so replaced, since then working fine.
T
Feb 17, 2009 at 1:00 AM
Ok..i see. Actually, its the same with all electronic/electrical goods..u never know which one will turn bad before u actually plug it in. In the same breath, i just read the following thread :(Palit HD4850 creating a problem for the folks :mad:)
*www.thinkdigit.com/forum/showthread.php?t=100981&page=1
and i'm reconsidering my decision of putting my hard earned money on the line for a card that might cause problems. I might go for a different vendor now altogether(maybe Sapphire) ..lets see, i'll decide when the time comes.

Thank God for fellow forum users :)