system restarted during drive scan.now not working

So i was running a scan on my external Imation HDD for errors.It had to be unmounted to do so.I cliked the dialong box that did so.And it was scanning so was isntalling something and the computer restarted mid scan and now the drive shows up without any space under it and when i try to run scandisk it says the drive,path or file is invalid or something.It shows under my safely removeable disk.I tried the ontrack recovery software and it is jsut stuck at the scanning drives option.Please help guys that 1 tb hard was literally full

Thanks in advace

Edit 2/09 : guys problems started again

Don't understand the unmounting part, you were scanning through Windows (running chkdsk) or what?

ArjunKiller said:
Buy a new computer.

-_- its an external drive dickhead.
if you need to troll someone go elsewhere.

Skud said:
Don't understand the unmounting part, you were scanning through Windows (running chkdsk) or what?

neither did i tbh when i tried to scan it it said the drive needs to be unmounted for it to can/fix errors so i cliked yes on the dialog box.

A

Control Panel, open System, go to the Advanced tab, click Settings under Startup and Recovery, remove the check from "Automatically Restart" under System Failure. This will cause the system to blue screen instead of restarting on errors and the information on the blue screen may give a clue as to the source of the issue.

Hehe, sorry for trolling.

radonryder said:
-_- its an external drive dickhead.
if you need to troll someone go elsewhere.

neither did i tbh when i tried to scan it it said the drive needs to be unmounted for it to can/fix errors so i cliked yes on the dialog box.

OK, remember, whenever you try to scan an external disk which was still accessed by some other program, then that unmount message come.

Now try to access the drive from a Linux LiveCD like Ubuntu. Try to access the drive after mounting and do some file operations. In my case, it has helped a couple of times.

ArjunKiller said:
Buy a new computer.

do not give junk comments and waste our time.

Skud said:
OK, remember, whenever you try to scan an external disk which was still accessed by some other program, they that unmount message come.

Now try to access the drive from a Linux LiveCD like Ubuntu. Try to access the drive after mounting and do some file operations. In my case, it has helped a couple of times.

Will do.
Cheers mate

format from linux (as suggested by Skud) should fix it. in case it doesn't, try using this: HP USB Disk Storage Format Tool

PS: have tried it only many pen drive, but never on an external HDD. not sure if it'll be able to recognize it.

Actually if you are lucky, you don't need to format it. Linux generally recognizes the disk after chkdsk interruption messed up.

Code:

Error mounting: mount exited with exit code 13: ntfs_attr_pread_i: ntfs_pread failed: Input/output error
Failed to read NTFS $Bitmap: Input/output error
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f parameter is very
important! If the device is a SoftRAID/FakeRAID then first activate
it and mount a different device under the /dev/mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation
for more details.

Tried to open it in linux that error came.
so guess i'll have to format it then?

no, you dont. run "/chkdsk <drive letter> /F" from admin command console.

this will do the trick.

my system froze too, with the exact same error (mine was a windows partition, so i had to use a mini-xp booted from a pen drive to run the command)

Yeah, run the chkdsk.

radonryder said:

Code:

Error mounting: mount exited with exit code 13: ntfs_attr_pread_i: ntfs_pread failed: Input/output error
Failed to read NTFS $Bitmap: Input/output error
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f parameter is very
important! If the device is a SoftRAID/FakeRAID then first activate
it and mount a different device under the /dev/mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation
for more details.

Tried to open it in linux that error came.
so guess i'll have to format it then?

Your file system in the disk, (i.e. NTFS) is corrupt. You make try running chkdsk(check disk) but I don't think it will solve your problem. Best way is to format the drive completely.

d6bmg said:
Your file system in the disk, (i.e. NTFS) is corrupt. You make try running chkdsk(check disk) but I don't think it will solve your problem. Best way is to format the drive completely.

oh no dude, most certainly NOT.

do the chkdsk FIRST.
as i've personally had this same problem, i can tell you exactly what to do.

formatting is a very extreme solution, do it only if NOTHING else works.

doomgiver said:
oh no dude, most certainly NOT.

do the chkdsk FIRST.
as i've personally had this same problem, i can tell you exactly what to do.

formatting is a very extreme solution, do it only if NOTHING else works.

dude Thanks a lot.
It is Scanning(just started 5 mins back).Slowly but it is.
praying it will fix it.

d6bmg said:
Your file system in the disk, (i.e. NTFS) is corrupt. You make try running chkdsk(check disk) but I don't think it will solve your problem. Best way is to format the drive completely.

checkmate.

alright so now the thing is working but a lot of the files seem to be corrupted.tried using o & o recovery and its pretty much stuck.Any more advice guys?
im thinkin when i can i'll recover what data i can and reformat it.but again thanks yiu guys a lot of the stuff in there was irriplaceable and not everything seems to be curropted.you guys sure saved my backside

try recuva... always worked for me

Recuva is onyl showing the files i had deleted.
Nearly all my media files on it seems to have been corrupted

there u go: Downloads Â» Freeware Tools Â» Page 1 - www.hiren.info
download Raw Copy 1.2

ok so same problem started again
cannot access it in linux(same error as ebefore)
and in cmd im getting cannot directly access the volume error when trying to use chkdsk J: /f.
do help guys

did you use 'run as admin' when you ran the command prompt???

yes i did use the run as admin

Now it sounds like a partially corrupt hdd, although I'm not totally sure. :unsure:

well, try running it from mini-XP from Falcon Four boot cd

FalconFour’s Ultimate Boot CD/USB 4.5 « FalconFour’s Perpetual Musings

if this doesnt work, nothing will.

ok so somehow managed to get it working a bit.so now i have a 150 gb partition that seems to be working fine and the remaining 780 gb is in anotehr aprtition
but i cant seem to farmat it.it says windows cant format it

try making an image of the partition...format that particular partition to resolve the file system issues...not sure if this would help...

check it out if its relevant

radonryder said:
ok so somehow managed to get it working a bit.so now i have a 150 gb partition that seems to be working fine and the remaining 780 gb is in anotehr aprtition
but i cant seem to farmat it.it says windows cant format it

try formatting using command prompt...this works when windows format method fails.

else use partition wizard home (a free tool but good one)