DIGIT-ARC read-only archive · snapshot: July 23, 2026

System shutdown problem

8 posts · originally from https://geek.digit.in/community/threads/system-shutdown-problem.180218/

Bhav
Bhav Original post #1
Dec 24, 2013 at 1:45 PM
one of my friend is facing a problem in his system
his motherboard model is Asus-p5sd2-vm and processor E2180 Intel Pentium dual core ram 1gb intex power supply 450w lg dvd drive 160gb seagate hdd
when ever he start his system it's go's off automatically i have cheek the temp of processor it was 33 c and i have re apply thermal paste and cheek the heat sink also can any one tell me what is the problem in system
rijinpk1
Dec 24, 2013 at 1:49 PM
take the cmos battery out for few minutes(say 15 minutes) and then re-insert it.
also try re-inserting ram from one slot to another.
Bhav
Bhav #3
Dec 25, 2013 at 11:51 AM
take the cmos battery out for few minutes(say 15 minutes) and then re-insert it.
also try re-inserting ram from one slot to another.

i will try it hope this will work

take the cmos battery out for few minutes(say 15 minutes) and then re-insert it.
also try re-inserting ram from one slot to another.
tried both things but didn't worked
rijinpk1
Dec 25, 2013 at 1:01 PM
this could be due to the dust accumulated. try to clean and re-assemble everything. also ,if possible try with another psu.
Bhav
Bhav #5
Dec 26, 2013 at 8:41 AM
this could be due to the dust accumulated. try to clean and re-assemble everything. also ,if possible try with another psu.

try this already but no luck one thing when mother board is out side of cabinet then the system workes perfectly i have only concocted the hdd only
rijinpk1
Dec 26, 2013 at 9:08 AM
there can be some loose connections when you put it in your cabby. check those loose connections.
W
Dec 26, 2013 at 10:28 AM
if it works outside cabinet but not inside cabinet then it may be due to some ground shorting issue(something touching the metal cabinet of your PC case under the MB like an unused screw stud).
Bhav
Bhav #8
Dec 27, 2013 at 8:49 PM
if it works outside cabinet but not inside cabinet then it may be due to some ground shorting issue(something touching the metal cabinet of your PC case under the MB like an unused screw stud).

ok thanx