DIGIT-ARC read-only archive · snapshot: July 23, 2026

ubuntu 7.04, firefox query

38 posts · originally from https://geek.digit.in/community/threads/ubuntu-7-04-firefox-query.68820/

L
legolas Original post #1
Sep 21, 2007 at 10:56 PM
Hi,

I have ubuntu 7.04 up and running fine! I love it so far, except for 1 little problem of installing fritz 10 using wine. But, that is for another post! :)

now, my question is that, in firefox, everytime i have to browse the page earlier, i used to press backspace in windows. However, it is very annoying to press alt + left arrow key!!! in here....

Is there anyway to change/append the shortcut keys in the firefox for linux??

legolas
QwertyManiac
Sep 24, 2007 at 6:08 PM
In the location bar, open the URL "about:config". In the "Filter" section, type "backspace". Below that, you will see "browser.backspace_action". Double-click on that line, and a popup window will appear. Just type in "0" (zero), and click "OK". After that, your Backspace should be the way you want it. :)

From
*answers.launchpad.net/ubuntu/+source/firefox/+question/3578
Rahim
Rahim #3
Sep 25, 2007 at 7:54 PM
Thanks. Now both alt+back as well as backspace does the same thing
skghosh44
Oct 2, 2007 at 6:22 PM
Kubuntu 7.04 FireFox Compiability

Is FireFox not compiatable in Kubuntu 7.04 ? Recently I installed Firefox in Kubuntu, it's open fine, but whenever I try to set up any setting it automatically close down. For Exampale if I click Edit>preference for settings fire fox closed down. Any one will point out the proble.
QwertyManiac
Oct 2, 2007 at 6:42 PM
How did you install it?
skghosh44
Oct 2, 2007 at 6:44 PM
Through Add/remove Programe.
praka123
Oct 2, 2007 at 7:16 PM
open in a terminal command firefox or firefox-bin and post the terminal trace.
skghosh44
Oct 2, 2007 at 7:28 PM
praka123 said:
open in a terminal command firefox or firefox-bin and post the terminal trace.
Output is here
X Error: BadDevice, invalid or uninitialized input device 169
Major opcode: 145
Minor opcode: 3
Resource id: 0x0
Failed to open device
X Error: BadDevice, invalid or uninitialized input device 169
Major opcode: 145
Minor opcode: 3
Resource id: 0x0
Failed to open device
praka123
Oct 2, 2007 at 10:44 PM
^^^
work with firefox,till it exit or crashes.then post the output from "xterm" or other terminals. konsole wont work.btw the solution for those X error seems to be because of some lines in /etc/X11/xorg.conf of non-existant devices.just see below link for solution.
*ubuntuforums.org/showthread.php?p=1264009
skghosh44
skghosh44 #10
Oct 3, 2007 at 8:30 AM
praka123 said:
^^^
work with firefox,till it exit or crashes.then post the output from "xterm" or other terminals. konsole wont work.btw the solution for those X error seems to be because of some lines in /etc/X11/xorg.conf of non-existant devices.just see below link for solution.
*ubuntuforums.org/showthread.php?p=1264009

I gone through the link above. But I dont know which settings I have to change. I didnot find xterm instead I found kxterm and installed it, but it did not served the purpose. hence I attach the file /etc/X11/xorg.conf for your scrutiny.
praka123
praka123 #11
Oct 3, 2007 at 12:13 PM
are u using kubuntu? :? :oops:
OK.Just view the new xorg.conf I have attached.
also are u having samtron 55 or 56V etc monitor?
then search and edit change section "monitor" in the line to as below:
Code:
Section "Monitor"
        Identifier      "Samtron"
        Option          "DPMS"
        HorizSync       30.0-55.0
        VertRefresh     50.0-120.0
EndSection
also with this monitor u can get max resolution @ 800x600 AT 85Hz-For that search and edit and change the line in xorg.conf
Code:
SubSection "Display"
    Depth        24
    Modes        "800x600"  "640x480"
EndSubSection
gary4gar
gary4gar #12
Oct 3, 2007 at 1:31 PM
@praka123
i also get these errors
Code:
gaurish@Digital-den:~$ sudo konqueror
X Error: BadDevice, invalid or uninitialized input device 172
  Major opcode:  146
  Minor opcode:  3
  Resource id:  0x0
Failed to open device
X Error: BadDevice, invalid or uninitialized input device 172
  Major opcode:  146
  Minor opcode:  3
  Resource id:  0x0
Failed to open device
DCOPClient::attachInternal. Attach failed Could not open network socket
X Error: BadDevice, invalid or uninitialized input device 172
  Major opcode:  146
  Minor opcode:  3
  Resource id:  0x0
Failed to open device
X Error: BadDevice, invalid or uninitialized input device 172
  Major opcode:  146
  Minor opcode:  3
  Resource id:  0x0
Failed to open device
kbuildsycoca running...
Reusing existing ksycoca
kio (KService*): WARNING: The desktop entry file /usr/share/applications/DefaultPlugins.desktop has Type=Link instead of "Application" or "Service"
kio (KService*): WARNING: Invalid Service : /usr/share/applications/DefaultPlugins.desktop
kio (KSycoca): ERROR: No database available!
kdecore (KProcess): WARNING: _attachPty() 11

how ever the command works like a charm, there no crashing of konquerror:)


gaurish@Digital-den:/etc/X11$ cat xorg.conf
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "Device"
Identifier "VIA Technologies, Inc. S3 Unichrome Pro VGA Adapter"
Driver "via"
BusID "PCI:1:0:0"
EndSection

Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
HorizSync 28-51
VertRefresh 43-60
EndSection

Section "Screen"
Identifier "Default Screen"
Device "VIA Technologies, Inc. S3 Unichrome Pro VGA Adapter"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection

Section "DRI"
Mode 0666
EndSection
gaurish@Digital-den:/etc/X11$

i am having Samsung Syncmaster 793S
praka123
praka123 #13
Oct 3, 2007 at 8:00 PM
@gary remove the "wacom" entries from xorg.conf.u dont have any tablet pc's right?xorg is searching for non-existant device hence the error codes,though there wont be any problem.
remove everything with wacom mentioned.look at my attachment on *www.thinkdigit.com/forum/attachment.php?attachmentid=1180&d=1191393674
skghosh44
skghosh44 #14
Oct 3, 2007 at 9:52 PM
are u using kubuntu?
OK.Just view the new xorg.conf I have attached.
also are u having samtron 55 or 56V etc monitor?

Yes I am using Kubuntu 7.04 and PCS 15" CRT monitor.
praka123
praka123 #15
Oct 3, 2007 at 10:08 PM
^so the attached xorg.conf solves ur problem of getting Xorg opcode error messages.
*www.thinkdigit.com/forum/attachment.php?attachmentid=1180&d=1191393674
u can replace ur xorg.conf with this one.
gary4gar
gary4gar #16
Oct 4, 2007 at 12:52 AM
^^^^^^
removed the wacom entries, now i get a small error
$ sudo konqueror
Password:
Have a gorilla...
Password:
DCOPClient::attachInternal. Attach failed Could not open network socket
kbuildsycoca running...
kdecore (KProcess): WARNING: _attachPty() 11
praka123
praka123 #17
Oct 4, 2007 at 3:55 AM
^that error is not related to the edits made in xorg.conf.it is about kde-dcopserver.it can be expected,since ur trying to run konqueror. :) I think is OK.

BTW,do u use ubuntu-insult feature for wrong passwd :D ?
skghosh44
skghosh44 #18
Oct 4, 2007 at 7:43 PM
@praka123

I am using default browser of Kubuntu 7.04 Konqueror. This browser is working very fine without any problem. Now if I configure my xorg.conf file as advised by you for preventing crash of Firefox Browser, is there will be any problem with the Konqueror Browser ?? Is there any benefit of using firefox other than Konqueror. If I use the default browser is there any disadvantage. Please point out.

2. May I use firestarter firewall in Kubuntu. If it is compiatable what will be the config ?
praka123
praka123 #19
Oct 4, 2007 at 9:46 PM
kde got its own firewall called "guarddog".install it.

using konqueror is good.infact it *may* be superior than mozilla/gecko based browsers.even apple's safari browser is based on webkit again based on khtml of trolltech.

use the xorg file i attached.it has nothing to do with firefox crashing.but it fixes the error message Xorg OPCODE thingy.

firefox error can be because of many reasons.open firefox from terminal,not konsole.work with firefox until it crash.look in the terminal for the error.

if ur using adobe flash player,sometimes flash based websites hang.the soltn will be to go for latest flashplayer 9 beta.
OK>first try what is the o/p on terminal when firefox crashes?
skghosh44
skghosh44 #20
Oct 4, 2007 at 10:19 PM
OK Thanks, I will try the same. Any problem will report here.
gary4gar
gary4gar #21
Oct 5, 2007 at 12:23 AM
praka123 said:
BTW,do u use ubuntu-insult feature for wrong passwd :D ?

yup...i like too me insulted by my box:p
praka123
praka123 #22
Oct 5, 2007 at 12:30 AM
^yaar-i am searching for this feature,where u open a terminal some random text(proverbs,quotes) is shown.I have experianced this with Linux-mint terminal or knoppix dont remember.have to digg out what the trick is.btw,there is this one called "fortunes" which is may be used as the input.i have even saw a package fortunes-debian-hints:
This package provides a set of hints and tips on using Debian, in a
fortune database format. New Debian users (or administrators) may find its
advice particularly sage or helpful, and even veteren Debianites might
find some new tidbits.
someone research on this.btw linux-mint gnome users anyone?do u have this feature when opening terminal?
edit:found some links reg this.u can use fortunes or cowsay :D
*www.linuxquestions.org/questions/showthread.php?t=582616
*forums.gentoo.org/viewtopic-t-97905.html
btw /etc/motd.tail is message of the day.
gary4gar
gary4gar #23
Oct 5, 2007 at 12:53 AM
praka123 said:
^yaar-i am searching for this feature,where u open a terminal some random text(proverbs,quotes) is shown.
*ubuntu-tutorials.com/2007/02/18/let-sudo-insult-you-when-you-screw-up/
praka123
praka123 #24
Oct 5, 2007 at 1:00 AM
^that i already posted here ;) .
*www.thinkdigit.com/forum/showthread.php?t=68998&highlight=insult
wht am saying is-this is something different.
gary4gar
gary4gar #25
Oct 5, 2007 at 1:23 AM
praka123 said:
^that i already posted here ;) .
*www.thinkdigit.com/forum/showthread.php?t=68998&highlight=insult
wht am saying is-this is something different.
then i dunno know
i am n00b still anyday infront of you;)
praka123
praka123 #26
Oct 5, 2007 at 1:29 AM
wth?ur using linux for past 1.5 yrs right? :twisted:
gary4gar
gary4gar #27
Oct 5, 2007 at 1:40 AM
praka123 said:
wth?ur using linux for past 1.5 yrs right? :twisted:
i left it in middle & then stayed away from linux for 8months as i did'nt have a net connection, after i got BB then i started off again

so i used linux barely for 4 months properly:(
praka123
praka123 #28
Oct 5, 2007 at 1:44 AM
btw,reg ur cool-n-quiet question,u need to install a kernel optimized for ur amd 64 from synaptic and try cpufreqd and powernowd.see the below link:
*kerneltrap.org/node/2894
gary4gar
gary4gar #29
Oct 5, 2007 at 1:57 AM
praka123 said:
btw,reg ur cool-n-quiet question,u need to install a kernel optimized for ur amd 64 from synaptic and try cpufreqd and powernowd.see the below link:
*kerneltrap.org/node/2894
i can install the kernel optimized for ur amd 64 from synaptic but then system arch will be 32bit or 64bit???

64bit is a pain in ass:(
praka123
praka123 #30
Oct 5, 2007 at 2:08 AM
the module ur trying to modprobe is available with amd optimized version.and remember gutsy offers better amd support wait till 18th for the release.also kalpik posted here that 64-bit is working well and for plugins,he uses nspluginwrapper for 32-bit apps.
kalpik
kalpik #31
Oct 5, 2007 at 9:54 PM
Yup, 64 bit is great now! Flash works.. Java browser plugin is a problem though. If you really need to run Java in your browser, there are a lot of scripts available for one-click install of 32 bit firefox and plugins too..
gary4gar
gary4gar #32
Oct 6, 2007 at 12:33 AM
kalpik said:
Yup, 64 bit is great now! Flash works.. Java browser plugin is a problem though. If you really need to run Java in your browser, there are a lot of scripts available for one-click install of 32 bit firefox and plugins too..
how much increase in performance you got by switching to 64bit??
M
mehulved #33
Oct 6, 2007 at 7:28 AM
praka123 said:
^yaar-i am searching for this feature,where u open a terminal some random text(proverbs,quotes) is shown.I have experianced this with Linux-mint terminal or knoppix dont remember.have to digg out what the trick is.btw,there is this one called "fortunes" which is may be used as the input.
Just install fortune package and add the line to bashrc.
To add a little more variety to it, use it with cowsay.
In gentoo, I've enabled 'offensive' use flag for sudo and fortune-mod, I get some really nice quotes there. It's not for kids, so gary and other kids on the forum please don't try it.
praka123
praka123 #34
Oct 6, 2007 at 7:39 AM
i need to try it.btwn there is a debian-tipsntricks-fortunes package also available.shud try/
kalpik
kalpik #35
Oct 6, 2007 at 8:14 AM
gary4gar said:
how much increase in performance you got by switching to 64bit??
Hmm.. As i dont do many CPU intensive tasks, i wont be able to notice the increase in the CPU throughput. Though applications DO open blazingly fast!
gary4gar
gary4gar #36
Oct 6, 2007 at 8:31 AM
mehulved said:
It's not for kids, so gary and other kids on the forum please don't try it.


i am Fully grownup Adult, even Replubic Of India certifys that:evil:
N
Nav11aug #38
Oct 6, 2007 at 9:23 AM
gary4gar said:
i am Fully grownup Adult, even Replubic Of India certifys that:evil:

hehe.. pwned ..lol