DIGIT-ARC read-only archive · snapshot: July 23, 2026

DIGIT-ARC / Hardware / CPU / Motherboards

USB not working in Intel 810 ???

8 posts · originally from https://geek.digit.in/community/threads/usb-not-working-in-intel-810.14522/

A
aakash Original post #1
Aug 25, 2005 at 2:19 PM
Hello friends,
For 2 months I have to live with Intel 810, 64 SD and P-III 466 Mhz proc with Windows XP(SP I or II is NOT installed). I have the TATA Indicom connection which can connected to my PC through USB. It worked fine with my prev PC (P-IV 2.8 GHz, Intel 865 GBF and 256 DDR). Every time I connect any USB device to the USB port, it gives the message "Unknown USB device". I have installed the TATA Indicom drivers but still not working. Please help me out....
club_pranay
club_pranay #2
Aug 25, 2005 at 3:54 PM
install the latest usb drivers..also try changing the ports.
A
aakash #3
Aug 26, 2005 at 5:25 PM
I have installed the latest drivers and also tried changing the port!!! What next ???
C
cyrux #4
Aug 27, 2005 at 5:01 PM
drivers prob
club_pranay
club_pranay #5
Aug 28, 2005 at 5:59 PM
check the USB device on other computer... just to make sure that it's working fine
vignesh
vignesh #6
Aug 28, 2005 at 7:25 PM
happened to me too.Call the guys there they will come and make it ok.For me it was due to the wires not attached properly.
tuxfan
tuxfan #7
Aug 28, 2005 at 10:55 PM
It has never worked for me on 810. You will have to install a USB card. They are affordable. Rs. 300-400 for 4 USB ports. You need an empty PCI slot on your MoBo
nix
nix #8
Aug 28, 2005 at 11:57 PM
hi..

i also had the same problem...additionally i couldnt transfer pics from my digicam to the comp...after some research i figured the fault lies with USB.
most probably you have USB 1.0
so buy a new USB 2.0 card.