DIGIT-ARC read-only archive · snapshot: July 23, 2026

Viewsonic VX 1932wm

14 posts · originally from https://geek.digit.in/community/threads/viewsonic-vx-1932wm.68142/

S
sai_cool Original post #1
Sep 14, 2007 at 9:48 AM
Hi guys,

just brought a Viewsonic VX 1932wm , its great, has good features, but there is one problem that i am facing

the native resolution is 1400x900, when i change to this resolution, the picture is slightly out of the monitors screen, when i move towards that end, the screen scrolls itself automatically to show that portion, but the other side of the picture gets out of range...

what do i do to adjust it??
B
BULLZI #2
Sep 14, 2007 at 11:38 AM
the resolution is 1400*900 or 1440*900??

hv u run the Viewsonic dvd given along with the product?i hv a 1921 WM.after i run the DVD, the resolution was set to 1440*900.
plz do check the refresh rate.
entrana
entrana #3
Sep 14, 2007 at 11:51 AM
u can try another alternate way
go to device manager then click that monitor tab
above click action menu-then scan for hardware changes
and the voila, there shud be that plug and play hardware installation box thingee just install ur monitor and u shud get ur native resolution
The_Devil_Himself
Sep 14, 2007 at 11:54 AM
it must be 1440*900 dude.Or just change the resolution manually to 1440*900 and see if it works.
entrana
entrana #5
Sep 14, 2007 at 11:59 AM
hes not getting that resolution thats why he is asking
The_Devil_Himself
Sep 14, 2007 at 12:11 PM
But I haven't seen a resolution like 1400*900.Its either 1280*1024 or 1440*900.
HE can try lower resolutions like 1280*1024 or try reinstalling his graphic drivers.
entrana
entrana #7
Sep 14, 2007 at 2:28 PM
have u seen a resolution like 1360x768? hm?
thats the resolution of my lcd tv
S
Sep 14, 2007 at 4:48 PM
when i keep my resolution at 1440x900, the whole image is not fitting into the screen...
entrana
entrana #9
Sep 14, 2007 at 10:22 PM
that isnt supposed to happen
RCuber
RCuber #10
Sep 14, 2007 at 11:02 PM
Dude sai_cool, adjust the height and width of you monitor. though I havent used tweaked with LCD's yet , but I beleive there will be such a setting as in every other monitor.
assasin
assasin #11
Sep 14, 2007 at 11:41 PM
@sai_cool hav u connected ur monitor thru d-sub?then u need to adjust the image thru 'manual Image Adjust' in the monitor menu..
if u can connect ur monitor thru dvi.it'll solve ur prob.
S
sai_cool #12
Sep 16, 2007 at 5:48 AM
i am using dvi only

just found out wat the problem is - its a nvidia driver problem, nvidia will be fixing it in thier next driver release..
entrana
entrana #13
Sep 16, 2007 at 7:04 AM
nvidia driver problem?
S
sai_cool #14
Sep 16, 2007 at 5:02 PM
yes i am using a geforce 6600, wat the nvidia driver does is that - it sets the resolution to 1440*1050 and thus leading to that inch of extra space!