Purchased a Seagate .. SATA 7200 rpm 160 GB HDD...
It was working fine...
But when i connected another 80 GB HDD with the system.. the System was unable to boot..
when i removed my HDD the system started fine...
Now when i connected my HDD to any system that system wont boot...
Wat can b the problem?
This is because your hard disk is not consider as first primary hard disk.In BIOS setting..change the primary hard disk .
the system isnt starting bro...
when i remove the power cable of the HDD... the system starts working...
but when i attach the power and data cable of the HDD it doesnt power on.. while the Green LED on the motherboard is also glowing...
Power Supply Unit.
whats your PSU's power output?
Tried another HDD...
worked fine with my board...
and when i attached my faulty drive to another PC.. that too failed to start...
help plz
if its under warranty, then get it replaced.
^^ But he said system isnt even starting...Primary or secondry...no matter..
System isn't starting.
Most probably the HDD is consuming more power then his PSU can provide.
Drive is faulty I think, get it replaced.
One more thing is that when i press the power button, the processor fan starts and then turns off... means gives three four rotations only...
then nothing happens...
I hav given the HDD to the vendor for replacement..
