water cooling questions

i m thinking about starting a new project in my next session holiday after my 9th exams are over so guys few question for you .... and yes the project will be of modding the old i ball cabby and a comletely home made watercooling system for my old pc (pentium D @3.4ghz ) ..
1. is this pump good for water cooling => 3.5 - 12 V DC Brushless Water Pump for Solar Fountain, Refrigerator, Aquarium | eBay
2. im thinking of buying a dremel tool for modding but dremel are too expensive so im searching of black & decker rtx b or 6 pls tell me where can i fing those in delhi around dwarka ?
3. is there and way to make your own radiators ?? if not then pls tell me which car has small radiators suitable for such projects ?

thats all for now ...eagrly waiting for your guys reply cause exams will be over on 21 march and school will start on 1 april so im in a hurry for information and start a new project asap !!!!

and yes the cooler should be of copper !!

Last time I looked at a home-made liquid cooling setup, it looked like this:
*www.thinkdigit.com/forum/attachment.php?attachmentid=9434&stc=1

form a banglorian man named xanan on bit-tech forum ... but well its very ugly and not like what im thinking to make ....

i know him personally....and this was a very basic scratch build.Counting the stuffs available in India it was a pretty good attempt.

in india most of these "projects" trickle down to a waste of time, energy and hard earned money, due to the lack of support. even if you start, people will try to hold you back. if you go to a shop for fabrication, they'll ask a thousand irritating questions, then then tell you they cant do it...

if you are doing this with your dad's money [which i guess you are

] i'd suggest you not to go for it.

well for this my dad will definitely provide me with full support ... no worries about fabrication no such things will be included just some welding work is there which will be done by a welder in my street but mostly will do it myself .....

people now about the questions asap ...

people i need fast replies pls !!!!!!!

nikhilsharma007nikx said:
people i need fast replies pls !!!!!!!

try on bit-tech.net

tried everything !!

Why fabricate your own parts? Why not build a proper setup like I did?

Tell me your budget. I'll help you out.

Extreme Gamer said:
Why fabricate your own parts? Why not build a proper setup like I did?

Tell me your budget. I'll help you out.

well what should be the budget im able to extend it but i may not require budget cause my home have mostly everything so tell me what have you build ??

I built my own setup using parts from EK waterblocks.

Judging by what you've already posted so far, I would suggest you read up about PC watercooling and how to go about it before asking for suggestions.

I ask for budget because it can be as low as 10k and as high as 60k, depending exactly on what you want to do.

Extreme Gamer said:
I built my own setup using parts from EK waterblocks.

Judging by what you've already posted so far, I would suggest you read up about PC watercooling and how to go about it before asking for suggestions.

I ask for budget because it can be as low as 10k and as high as 60k, depending exactly on what you want to do.

well for watercooling i have to import parts for it so i dont thing ill be buying but modding will be there still tell me how you made it ...maybe some pics

and yes if i would buy it my budget would be 10k ... and yes tell me how can i import those parts ?

I purchased my parts from the EK waterblocks webstore, but there are many places you can buy from, such as jab-tech, performance pcs, frozenCPU etc.

I'd say just get a pre-built kit from corsair...

my watercooling setup cost me 20k and required a decent-sized case to fit properly. you will not be able to fit the setup in a tiny case.

*i577.photobucket.com/albums/ss213/aayushthegamer/th_92f6e7c6.jpg

this is WIP picture after I did maintenance work on my setup many months ago.

Extreme Gamer said:
I purchased my parts from the EK waterblocks webstore, but there are many places you can buy from, such as jab-tech, performance pcs, frozenCPU etc.

I'd say just get a pre-built kit from corsair...

my watercooling setup cost me 20k and required a decent-sized case to fit properly. you will not be able to fit the setup in a tiny case.

*i577.photobucket.com/albums/ss213/aayushthegamer/th_92f6e7c6.jpgi

this is WIP picture after I did maintenance work on my setup many months ago.

wow man it looks cool but lack of cable management . do they support international shipping ?

Yes.

Like I said, it is a WIP (work in progress) picture. The setup doesn't look that messy right now.

Extreme Gamer said:
Yes.

Like I said, it is a WIP (work in progress) picture. The setup doesn't look that messy right now.

do they support international shipping ? wat's the charge ? how much time do they take ?

that depends on what you buy, the shipping option you choose and how long customs takes.

Extreme Gamer said:
that depends on what you buy, the shipping option you choose and how long customs takes.

hmm will buy when i get my new computer so for now above questions pls .

buy the corsair h100i

avinandan012 said:
buy the corsair h100i

if i can i would definitely