DIGIT-ARC read-only archive · snapshot: July 23, 2026

What is this problem with my PC

15 posts · originally from https://geek.digit.in/community/threads/what-is-this-problem-with-my-pc.97178/

windchimes
windchimes Original post #1
Sep 5, 2008 at 5:09 PM
My pc sometimes when switched on stops at the first screen showing the Motherboard manufacturer label.. Sometimes it goes further to boot in and then freezes at the
desktop screen .. What is this problem..?? This doesnt happen always but unfortunately for almost 85%of the time. Can anyone identify the problem and the solution?

BIOS label reports harddisk has some problem and needs to be replaced. But CHKDSK shows no problem. So I am not sure about it. By the way wish to know any free tool that can diagnose disk problems.??
rhitwick
Sep 5, 2008 at 5:17 PM
I guess in a few days u'l b visited by BSOD:D.........

Check ur RAM power connections.......
windchimes
Sep 5, 2008 at 5:29 PM
POWER seems to be ok...

Can you please explain it in detail and any solution..I dont want to see that Blue screen on my pc
rhitwick
Sep 5, 2008 at 5:43 PM
Oh..........I forgot to put a "comma" b/w RAM and Power.........:D

Check ur RAM in ur frnd's PC..........
If using more than 1 modules..........check both of them in both slots one at a time..........
windchimes
Sep 7, 2008 at 8:26 PM
I Formatted my windows installation drive and after reinstallation it works
fine. No warning when booting in..

BUT..Again it freezes at times. I've seen this happening mostly when connected to net.
(os -win xp , RAM-2GB, Browser - Opera latest version)..

Anyone knows the solution..??
desiibond
Sep 8, 2008 at 4:01 AM
Could also be a probme with SMPS.

I had a problem where windows used to crash whenever I connect extra fan to my desktop (side fan). That was after I added a new GPU. SMPS couldn't provide stable voltage to all the compnents and if I remove the extra fan, I used to get windows back.

Also check the IDE/SATA cables. A problem with the cable can't be ruled out.
ECE0105
ECE0105 #7
Sep 8, 2008 at 1:53 PM
Had the same problem with a Friends PC... Just removed the Processor and Heatsink and put it back in and reset the BIOS via Jumper... That fixed it...
Psychosocial
Sep 8, 2008 at 3:24 PM
run Memtest..........seems a prob. with RAM
uchiha_madara
Sep 8, 2008 at 7:16 PM
@windchimes:
BUT..Again it freezes at times. I've seen this happening mostly when connected to net.
Same thing happened to me ,found out that I had one faulty RAM stick.

One smart Avatar :).
G
Sep 8, 2008 at 7:24 PM
may be ur ram freq is not supported by ur motherboard
sagar_jxd
sagar_jxd #11
Sep 8, 2008 at 8:08 PM
this is the problem from ur motherboard it is not working properly u shuld contact the dealer n tke suggestion frm and if u hve the warranty period of motherboard till now u should immediate handover ur motherboard to the company n complain wht u r having........
IronManForever
Sep 8, 2008 at 8:48 PM
Dear windchimes.

Well, AFAIK I had the same problem 4-5 years ago with my Pentium II machine. The problem was with the processor. It was overheating. Check whether the fan and heatsink are properly attached or not.

Regards;
IronMan.
windchimes
Sep 9, 2008 at 2:05 AM
Thanks for the myriad of suggestions..

So is it mobo, processor, ram, smps, fan, heatsink..?? *l.yimg.com/us.yimg.com/i/mesg/emoticons7/102.gif

Mobo has no warranty. System detects the entire 2GB RAM.

And I was thinking it had something to do with faulty cluSters in HDD thoguh my machine is
not detecting it. No one commented on the same *l.yimg.com/us.yimg.com/i/mesg/emoticons7/39.gif

CAN ANYONE RECOMMEND A GOOD FREE SOFTWARE FOR TESTING SYSTEM HARDWARE..??
A
acewin #14
Sep 9, 2008 at 3:37 AM
anything can be the issue as guys suggested. But highest chances is of SMPS (it has gone weak and is not suitable), change it and test other hardware.

2nd would have been RAM becoming incompatible or any of the two going bad, seems less as u said both are getting identified and working fine.

Because next comes loose connection in putting proccy heatsink and all connectors.
So once you are sure of your SMPS deassemble all your components and fix them again properly.
S
Sunsky #15
Sep 10, 2008 at 2:18 PM
Hi Windchimes,
If u have any device installed to USB like USB modem, then remove it and boot the PC. I used to hav the same prob, but later figured it out. :smile: