DIGIT-ARC read-only archive · snapshot: July 23, 2026

which mobo for which proccy.

11 posts · originally from https://geek.digit.in/community/threads/which-mobo-for-which-proccy.165317/

D
digitfan Original post #1
Oct 26, 2012 at 3:26 PM
Guys please note the points below

1.I do not intend to overclock much.
2.Budget not above 22k (mobo+ram+cpu)
2.I have decided i5 2400 or 3450 + ASUS P8H61-M LX Motherboard +G.Skill RipjawsX DDR3 4 GB

I want to know these

1.Are sandy bridge and ivy bridge both same in performance.
2.can i max overclock it to 4ghz.(Though i dont intend to)
3.Is this config ok or else suggest something.
skeletor
Oct 26, 2012 at 4:32 PM
1. yes, Ivy Bridge is nothing revolutionary in terms of performance. Both Sandy Bridge and Ivy Bridge have same performance. 2-3% give or take.

2. You can only overclock if you buy a K suffix processor and pair it only with a Z68/Z77 motherboard. Example, i5-2500K, i5-3570K etc. with a Z68/Z77 chipset motherboard.

In any other case, you can't overclock.

3. Config is okay. But I don't see any reason for you to upgrade if you have a first generation i7-950 or something. I don't know if you have, but just in case. :)
D
Oct 26, 2012 at 4:48 PM
Thanks for the reply my existing system is of C2Q.
Ok then you mean in i series we cannot overclock at all if we dont choose a k series proccy and a z68/z77 mobo?

Another thing then will that mobo support i5 3570k? Just read in a review that this one runs hot too is it true?
skeletor
Oct 26, 2012 at 5:08 PM
Thanks for the reply my existing system is of C2Q.
Ok then you mean in i series we cannot overclock at all if we dont choose a k series proccy and a z68/z77 mobo?

Another thing then will that mobo support i5 3570k? Just read in a review that this one runs hot too is it true?

Try reading this thread fully: *www.thinkdigit.com/forum/cpu-motherboards/150570-intel-lga-1155-motherboard-thread.html Your question is answered right at the end, but read the thread completely. :)

yes, Ivy Bridge runs hotter than Sandy Bridge. Sandy Bridge is more suited if you want to overclock.
D
Oct 26, 2012 at 6:13 PM
^^read and replied here *www.thinkdigit.com/forum/cpu-motherboards/150570-intel-lga-1155-motherboard-thread-6.html

Btw my budget is 6k max for mobo and 12k max for proccy another 2k for ram.(another 2k reserved.Wont spend it if its not necessary)
topgear
topgear #6
Oct 27, 2012 at 6:39 AM
^^ at 12k you can get a i5 3550 and at 6k get Asus P8B75-M LE - get 2x 4GB Corsair Value Select 1333 Mhz DDr3 @ 2.2k.
D
Oct 27, 2012 at 11:17 AM
^^wont that run hot too.Please note that i will be using stock coolers.What will be its max temp?
topgear
topgear #8
Oct 28, 2012 at 2:57 AM
the cpu indeed run hot compared but then again investing for an aftermarket cooler - even one like Cm Hyper 212 Ev / Hyper TX3 is always a good idea be it a quad core SB/IB cpu and with same clock speed IB cpus perform 5-10% better than SB cpus and under volting them will keep the tepms in check ;-)

*media.bestofmicro.com/U/P/338065/original/load%20temp.png

AnandTech - Undervolting and Overclocking on Ivy Bridge
D
Oct 29, 2012 at 12:16 PM
^^So that means you have to underclock them to get lower temps.
topgear
topgear #10
Oct 30, 2012 at 2:41 AM
No .. just underVolting is enough - read the article of Anadtech ;-)
A
Nov 2, 2012 at 2:10 AM
ico said:
2. You can only overclock if you buy a K suffix processor and pair it only with a Z68/Z77 motherboard. Example, i5-2500K, i5-3570K etc. with a Z68/Z77 chipset motherboard.

Well, you can use an ASRock motherboard and it's "No-K OC" function to get a limited OC out of the non-K processor.....

Anyway, for OP's dilemma; I suggest getting a Biostar TZ77B motherboard and you can select an appropriate RAM set and CPU as the motherboard supports K-series processors.