DIGIT-ARC read-only archive · snapshot: July 23, 2026

Which one is correct?

16 posts · originally from https://geek.digit.in/community/threads/which-one-is-correct.152587/

A
ArjunKiller Original post #1
Feb 11, 2012 at 8:06 PM
I'm getting 2 readings from different applications. The ASUS software utility that came with the driver DVD shows 32C while Core Temp shows 49C...

*i.imgur.com/cQiqY.png

*i.imgur.com/xQ7eB.png
sukesh1090
Feb 11, 2012 at 9:43 PM
download hwinfo from following link based on which os you are using 32 or 64bit.post the screen shot of that here.
hwinfo
Sujeet
Sujeet #3
Feb 11, 2012 at 10:50 PM
ASUS Utility That came with your mobo should definitely be more accurate in displaying system sensor stats.
Moreover Core temp is showing same temp"49" in all the fields:max,min,current for both cores(biassed).And CPU load is 0%!
Try Open Hardware Monitor.
Its a free utility and gives easy-to-read stats of all the devices on system:
Open Hardware Monitor - CPU Temperature, Fan Speed and Voltages in a Free Software Gadget
topgear
topgear #4
Feb 12, 2012 at 5:13 AM
the Asus utility is showing the cpu tcase temp and core temp is showing cpu core temps ;-)

Anyway, you can either try HWinfo or HWmonitor for better sensor readings ;-)
A
Feb 12, 2012 at 9:13 AM
HWinfo is showing these readings: How do I lower temperature?

*i.imgur.com/tAHMs.png
Sujeet
Sujeet #6
Feb 12, 2012 at 7:08 PM
You need CPU cooler like CM Hyper 212 to lower the temps.
sukesh1090
Feb 12, 2012 at 7:20 PM
@ArjunKiller,
clean the cooler and reapply thermal interface material.that should lower the temperature.
topgear
topgear #8
Feb 13, 2012 at 3:33 AM
@ ArjunKiller - if you are serious about OCing that cpu ( read to go over 3Ghz ) then think of buying good HSF like CM Hyper 212 Evo but do remember the mobo you have is not a very good OCer as it's meant for entry level market.

The the HWinfo pic is for idle temps and get a cheap cooler- a good TiM from Cm will cost around 500 bucks - but if you get CM TX3 you are getting a TiM tube and the cooler itself at only ~1.2k - so you are only paying 700 bucks for the cooler and a good fan which are much more better than Intel stock HSF ;-)
A
Feb 14, 2012 at 7:03 PM
Well, under gaming load also, the temperatures do not cross 60 degrees. By the way I am using Zebronics cooler with the TIM that came with the cooler (Total cost 200 :p ), as the Intel HSF was running at just 300-400 RPM..

Edit: How can be the TJ Max be the same as idle temperature? :O
sukesh1090
Feb 15, 2012 at 12:04 AM
Well, under gaming load also, the temperatures do not cross 60 degrees. By the way I am using Zebronics cooler with the TIM that came with the cooler (Total cost 200 :p ), as the Intel HSF was running at just 300-400 RPM..

Edit: How can be the TJ Max be the same as idle temperature? :O

can you post the screen shot of it.
topgear
topgear #11
Feb 15, 2012 at 5:25 AM
Well, under gaming load also, the temperatures do not cross 60 degrees. By the way I am using Zebronics cooler with the TIM that came with the cooler (Total cost 200 :p ), as the Intel HSF was running at just 300-400 RPM..

Edit: How can be the TJ Max be the same as idle temperature? :O

the tjmax temp of your cpu is 100c but I'm surprised to see same current/min/max temp - there must be something wrong with your cpu/mobos temp sensor.
A
Feb 15, 2012 at 8:07 AM
Dude, I had an older mobo which showed the same temperature... this is a new mobo back from rma.
topgear
topgear #13
Feb 16, 2012 at 3:21 AM
^^ then it must be something wrong with the cpu thermal sensors.
A
Feb 16, 2012 at 11:39 AM
Does the HSF have any sensor ?
sukesh1090
Feb 16, 2012 at 12:50 PM
^^
no.sensor will be present in mobo and processor.
A
Feb 16, 2012 at 1:51 PM
Then I think processor sensor is faulty :)