DIGIT-ARC read-only archive · snapshot: July 23, 2026

WiFi or Ethernet

10 posts · originally from https://geek.digit.in/community/threads/wifi-or-ethernet.208083/

meetdilip
meetdilip Original post #1
Feb 29, 2020 at 9:42 AM
I currently have 2 options. Connect through WiFi or LAN cable. Which one do you think is the best in terms of connectivity ? I am not much far from the WiFi router. But the signal is 3 out of 4.
Zangetsu
Feb 29, 2020 at 12:30 PM
LAN cable.
meetdilip
Feb 29, 2020 at 3:07 PM
May I ask why ?
Anorion
Anorion #4
Feb 29, 2020 at 5:13 PM
Cables are slightly faster and much more dependable
Anorion
Anorion #6
Feb 29, 2020 at 6:35 PM
Uh reliable? Less dc, packet loss, slightly lower ping and latency etc
Zangetsu
Mar 1, 2020 at 4:18 PM
May I ask why ?
WiFi has disconnection issues, which is very less in cable connection. Same as your 3.5 mm headphone jack vs Bluetooth connection.
Cool Buddy
Mar 2, 2020 at 12:14 PM
It really depends a lot on your usage. If one was clearly superior to the other, the other would have been discarded so far. The fact that both exist indicates that there are pros and cons of both.

Cable is good when:
  1. You need to transfer large amounts of data reliably, like HD video streaming
  2. You need consistent ping timings, for instance, online gaming
  3. You need high levels of reliability
Wi-fi is good when:
  1. It is not possible to place the device and router in close proximity
  2. The device needs to be mobile
  3. The device does not have Ethernet connectivity
  4. The device is only used for casual browsing where occasional disconnection doesn't matter
  5. You have to connect a lot of devices (for cabling, you'll need a switch. But for wi-fi, most routers will support 10 devices).
Alternatives:
  • You can run a cable through the walls to get more reliable service farther from the router.
  • You can get a more powerful router to make wi-fi more reliable
  • You can get an access point and fix it on the opposite end of the house to improve connectivity
As far as reliability is concerned, for me, wi-fi experiences occasional drops in connection. Not enough to bother me, but might bother someone with a different usage pattern. Sometimes it also becomes slow for no perceptible reason. Which is why my Raspberry Pi, which acts as NAS server in my house, is connected via cable. Everything else is on Wi-fi.
S
sam9s #9
Mar 18, 2020 at 12:08 PM
I have close to 70 devices in my house on LAN. 15 devices always online at one point in time and only my laptop and mobile are on wifi and yes all sonoffs used for automation are also on wifi (there is no other way in this case.) Rest all are on ethernet. Specially Synology, Shield and all my Rpis.

Ethernet wins hands down, in every scenario. even wifi AC I am not comfortable. For me its ethernet always all the way, unless there is no other option like in case of sonoffs
J
JamesTryForYou #10
May 16, 2020 at 1:15 AM
Simply Put, Wired connection is better than Wireless.

Why? Because Wireless router operate commonly on 2.4Ghz & 5Ghz. These wireless bands may be interfered with other Devices operating in the same frequency or some Electrical appliances. Wired connection doesn't have all these interference.

I personally use Wireless, I've a TPLink router with 4 antenna's and provide good coverage in my room without a drop in signal.

However, the fact that you're close to your router and not receiving complete strength makes me think of the following factors.

1) There are various standards of wireless like b/g/n. 'N' standard Network card will provide you better strength.
2) The channel your router is operating may not be optimal, [refer to your router manual on how to change wireless channel, modern routers does that automatically]

It all boils down to your usage, if its a Desktop just hook the Ethernet Cable. If its a Laptop and mobility is your requirement, use wireless. ;)

Hope this helps.